EASY WAYS TO SERVICE MOTORCYCLE FOAMS
Terlatih.The part of the seat on a motorcycle that when it is torn or perforated is good due to various causes that cause the seat to be damaged by deliberately leaving the seat on the motorcycle to be damaged so it is sure to make it worse and affect other parts of the seat itself, such as the part of the foam upholstery, which is even worse for the seat mat or the support of the seat, is also broken. And if you experience a mat or pedestal that is already damaged, whether it is broken or broken, to be able to replace and repair it you must replace the total part of the seat, to be able to replace and perform total service in general, it will take a lot of time, of course, more costly compared to service other. Therefore, to avoid or avoid more expensive costs, do not delay service, or immediately solve the damage to the seat on his motorcycle. Actually, to repair and service a seat on a motorbike that is damaged in terms of foam that is already severe, we can do it ourselves quite easily, most importantly there is a will to add tools and materials available and as needed to further clarify the following is a fairly easy way including:
For all friends who want to do in overcoming the damage to the foam seat on a motorcycle, it is actually not that difficult as for example imagined in other words, it is quite easy, the most important thing is that the intention is strong and in addition to using or using tools that are used need really fit and fit so that later it can be maximized to facilitate the process of overcoming the damage to the foam part. The tool is also easy to find and simple, it can be around all friends who are not aware that it can be used for the process. As for knowing the tools or materials that will help the process of repairing seat foam on motorbikes, the following types include:
To find out which tools or materials are used and can help simplify the process of repairing the foam seats, they include:
A. Foam to patch or replace the motor seat foam.
B. Aibon glue.
C. Hacksaw.
D. Coconut melting tool.
It turns out that only a tool or material as for the process of an easy way to deal with the damage, the following can be upholstered.
A. After opening the seat cover, then prepare the seat foam to patch or overcome the damage.
B. Cut or fashion according to the breakdown of the foam using a hacksaw.
C. Apply or attach ribbon glue to the 2 surfaces,
both the damaged foam surface and the foam surface will have been made into a mode or foam to patch the damage evenly by easily applying carbon glue using the tip of a hacksaw unused foam. After that, let it dry by itself.
D. After it looks dry,
just stick it between the damaged upholstery foam and the upholstery foam which is for patching, if you think it feels strong then smooth the surface using a normal tool to fade the coconut, do it repeatedly until the surface is smooth and also average.
Friends of all, it turns out that the way to patch or repair seat foam on a motorcycle is quite easy. Until here first, hopefully, the information from us can be useful and useful, I'll see you next time. thank you
Post a Comment for "EASY WAYS TO SERVICE MOTORCYCLE FOAMS"